Install the Power CAN Cables
Systems with a USB Module
1.See FIG. 3. Connect cable (413) to J6 of the display module and to connector P3 of the USB module.
2.Connect saved cable (412) to connector P4 of the USB module and to J8 of the Advanced Fluid Con- trol Module.
3.Connect the power supply CAN cable (C, FIG. 2) to J7 on the Advanced Fluid Control Module (FIG. 3).
4.See your ProMix 2KE Operation manual for instruc- tions on using the USB module.
USB Module (if present)
P4 | P3 |
Connect cable | Connect cable |
(412) here | (413) here |
| TI16580a |
| Display Module |
TI16604a
J6
Connect cable (413) here
Install the Kit
Systems without a USB Module
1.See FIG. 4. Connect cable (413) to J6 of the display module and to J8 of the Advanced Fluid Control Module.
2.Connect the power supply CAN cable (C, FIG. 2) to J7 on the Advanced Fluid Control Module (FIG. 4).
Display Module
TI16604a
J6
Connect cable (413) here
Advanced Fluid Control Module
J8 | J7 |
Connect | Connect |
cable | cable (C) |
(413) here | here |
Advanced Fluid Control Module
TI16579a TI16602a
J8
Connect cable (412) here
FIG. 4. Install Power CAN Cables (without USB Module)
J7
Connect cable (C) here
TI16579a TI16602a
FIG. 3. Install Power CAN Cables (with USB Module)
3A1324B | 5 |
