30
6.1.1 3-Point Harness
1. Fromback, push harness anchor
buckleback through harness slot.
Ifnecessary,fromfront, use harness
strapto pull buckle from slot .
2. Reinsertharness anchor buckle in the
appropriateslot .
3. Fromback, remove harness strap from
harnesstightener.Ifnecessary,from front,
useharness strap to pull strap fromslot.
4. Reinsertstrap in the appropriate slot. Thread
strapthrough tightener exactly as shown .
5. SAFETY CHECK:
a)CHECK that straps are not twisted;
b)CHECK that straps are secure: pull on
harnessstraps from front.
c)CHECK that harness anchor buckle is
snappedflat against back as shown .
Harness
tightener
Harnessanchor
buckle