39
1. Forease of installation, extend LATCH
toits maximum length.
2. Positionbase in vehicle seat as
shown.
3. ThreadLATCH throughbasebelt
pathnormally used for vehicle
seatbelt. Make sure that LATCH is
UNDER tongueon base .
Belt must lay flat and not be twisted.
4. HookConnectors to vehicle lower
anchors.Pull firmly on Connectors to
besure they are attached .
5. TightenLATCH bypushingdown
hardon base and pulling the
adjustmentbelt .
6. NEVER puttwo LATCH connectorson
onevehicle LATCH anchorunless
specificallyallowed by the vehicle
manufacturer.
7. Testinfant restraintforsecure
installationas described in infant
restraint“Final Safety Check” p.42.
8. Checkthat the LATCH stays tight and does notslipfrom the
tightenedposition. If it does not staytight, try another
seatingposition or contact Customer Service.
6.4 Using LATCH to install Base
Tongue