Manuals / Brands / Baby / Car Seat / Graco / Baby / Car Seat

Graco PM-1373AD (fig. a), 2Buckle:, 1Harness Tie:, 3Tether Strap (fig. b):

1 36

Download 36 pages, 1.4 Mb

OPERATIONS and ADJUSTMENTS

1Harness Tie:

•To open: Press tab and pull apart (fig. a).

•To close: Snap halves together. Make sure harness tie is locked by pulling out on each half.

2Buckle:

•To lock: Insert both tongues into buckle. Pull up on tongues to be sure they are locked.

•To unlock: Press red button and pull tongues out of buckle.

3Tether Strap (fig. b):

•To tighten: Pull loose end of strap.

•To loosen: Lift adjuster

Contents

Page Page MUST DO NOT use it again DO NOT With Harness System: Without Harness System: NOT DO NOT To avoid burns, always check before putting child in car seat With Harness System Without Harness System forward-facing (fig. a) HINT: (fig. b) (fig. c) Page To prevent serious injury or death: •Never place vehicle belt in front of child when using harness system must above (fig. a) Page Shoulder belt DO NOT use shoulder belt loose or positioned under child’s arms or armrests •Never use a vehicle “lap-only”belt across front of child •Vehicle belts MUST lay flat against child and MUST not be twisted MUST Page 1Harness Tie: 2Buckle: 3Tether Strap (fig. b): Page 4 Harness Straps (fig. c): 5 Changing Harness Strap Slots: (fig. e) (fig. f) End of each strap must be at least Page Removal: Re-assembly: When re-assemblingharness system, be sure harness straps are not twisted Page Page Flip cannot can must not Page Seat Crease Page (fig. b - page 25) Pull 1/2 inch (1 cm) Page short Available on some models: Removing Seat Pads: CAUTION: Removing Armrest Pads: Removing Cup Holder: Tab Page with same way without Page Page 1 Fold instruction manual 2 Store behind headrest pad