Graco PM-1373AD NOT, MUST, above, NOTE:, (fig. d), (fig. e), (fig. f), 4 Harness Straps (fig. c):, 5 Changing Harness Strap Slots:, End of each strap must be at least

OPERATIONS and ADJUSTMENTS (continued)

4 Harness Straps (fig. c):	5 Changing Harness Strap Slots:
A To loosen: Lift adjuster bar and pull	MUST use slots at or just above shoulders.
harness straps from front of car seat to	A Lift adjuster bar and pull harness straps
desired length.
		out of current slots.
or
To tighten: Lift adjuster bar and pull	B	Change harness strap slots.
ends of harness straps down until all		Make sure harness straps are threaded
slack is removed.
		through matching slot of seat pad and
B Pull harness straps on front side to lock		car seat.
		It may be necessary to remove seat pad
adjuster bar.
		from top of car seat.
C When adjusting harness straps, pull	C	Thread harness straps behind opening
harness straps through tongues in buckle
		in metal plate and adjuster bar (fig. d).
to remove all slack.
	D Lift adjuster bar and thread straps over
WARNING		adjuster bar, creating loop, and down
		behind metal plate (fig. e).
To prevent serious injury or death:	E	Pull ends of harness straps down (fig. f).
End of each strap must be at least
	F	Adjust harness straps to fit child (see 4 ).
2 inches (5 cm) below metal plate (fig. f).

NOTE: Make sure straps are NOT twisted.

14