Graco PM-1373AD 20

VEHICLE SEAT BELTS

WARNING

Not all vehicle seat belts can be used with a car seat:

•Car seat with harness system MUST be held securely at all times by a lap belt (or lap belt portion of a lap/shoulder belt) that will not change length while driving.

•Car seat without harness system MUST be used with a lap/shoulder belt.

To provide the best installation of the car seat:

•Read the vehicle owner’s manual regarding car seat installation and seat belt use with car seat.

•Follow all instruction labels on vehicle seat belt and car seat.

If car seat with harness system is not held securely after following instructions in this manual, vehicle seat belt labels, and vehicle owner’s manual:

•Move car seat to another seating location and try again, or

•Contact vehicle dealer for possible seat belt modification parts.

Contents

Page Page MUST DO NOT use it again DO NOT With Harness System: Without Harness System: NOT DO NOT To avoid burns, always check before putting child in car seat With Harness System Without Harness System forward-facing (fig. a) HINT: (fig. b) (fig. c) Page To prevent serious injury or death: •Never place vehicle belt in front of child when using harness system must above (fig. a) Page Shoulder belt DO NOT use shoulder belt loose or positioned under child’s arms or armrests •Never use a vehicle “lap-only”belt across front of child •Vehicle belts MUST lay flat against child and MUST not be twisted MUST Page 1Harness Tie: 2Buckle: 3Tether Strap (fig. b): Page 4 Harness Straps (fig. c): 5 Changing Harness Strap Slots: (fig. e) (fig. f) End of each strap must be at least Page Removal: Re-assembly: When re-assemblingharness system, be sure harness straps are not twisted Page Page Flip cannot can must not Page Seat Crease Page (fig. b - page 25) Pull 1/2 inch (1 cm) Page short Available on some models: Removing Seat Pads: CAUTION: Removing Armrest Pads: Removing Cup Holder: Tab Page with same way without Page Page 1 Fold instruction manual 2 Store behind headrest pad