40 309365
Maintenance
Daily:
Inspect, clean and replace as needed
DManifold filter,gun filter and inlet stainer
DWet cup forleakage, tighten if needed
DTSL level
DGun trigger safety
DTipwear, replace if necessary
DElectriccord and plug
Weekly:
DCheck tightnessof wet cup
DInspect all high pressurepaint hoses
Annually:
DSchedule maintenancecheck at an autho-
rized Gracorepair center

Storage

1. Perform Cleanup, page 31

Tip Wear

12
(305) 11
(280) 9
(229) 5,5
(140)
TIPOPENI NG ENLARGEMENT New Tip
.015 Worn to
.017 Worn to
.019 Worn to
.021
FLOWRATEin gpm(lpm) 1/4
(0,87) 1/3
(1,14) 3/8
(1,4) 1/2
(1,74)
Note: A515 tip produces a 10 in. pattern width when measured 12 in. from tip to work
surface; spraying paint with viscosity of 20 sec #4 Zahn cup and at 1600 psi
(110bar, 11 MPa)
NEW WORN
OUT
SPRAY PATTERN WIDTH
in inches (millimeters)
Worn Tips WastePaint
Cost Money!
2. Wrap cord, place siphon tube set in holder
ti5875b