On/Off Switch
Removal |
|
1. | Relieve pressure; page 4. |
|
Installation
1.Install new ON/OFF switch (309) so tabs of switch snap into place on inside of pressure control housing.
2.Fig. 15. Remove five screws (307) and cover (322).
3.Disconnect two wires (A) from ON/OFF switch (309).
4.Press in on two retaining tabs on each side of ON/OFF switch (309) and remove switch.
1
309 A
302
307 303
322 | D |
| |
| E |
2.Connect two wires (A) to ON/OFF switch.
3.Install pressure control cover (322) with five screws (307).
313
310
315 | 319 | 318a |
318z 318aa
8711A
Fig. 15 | 1 | Locate switch terminals as shown |
|
|
12 308870
