Air Cylinder and Solenoid Valve
Reassembly
1 Insert crowned backing nut on shaft of cylinder.
2Using new cylinder from kit, position cylin- der in sprayer frame, inserting end of cylin- der through pump bracket mounting hole.
3Install locking nut flush to end of shaft.
4Install dampening grommet.
5Align hole in end of air cylin- der and replace pin.
6Replace cotter pin through hole in pin, bending ends to secure.
ti4421a
7 Reattach electric wire terminals. Terminals are not polarity sensitive and can be connected to either post.
8Gently push hose in quick release fitting.
ti4456a
ti4417a
| ti4407a |
ti4410a | 9 Replace RotoFlex HD Pump and hose extension, |
| |
| page 12. |
10 Replace front cover and hopper. See Removing and Replacing Hopper, Front and Back Cover, page 9.
ti4455a
24 | 310645K |
