Pressure Relief Procedure
1Turn Main Power Switch
(A)OFF.
2Turn fluid flow regulator
(K)all the way down to reduce pressure.
Preparation
Preparation
Grounding and Electric Requirements
The sprayer must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.
| WARNING |
| Read warnings, page 3. |
| • The sprayer cord includes a |
| Ground |
| grounding wire with an appro- |
K | priate grounding prong. |
ti4303a | ti4295a |
3 Open gun air valve (aa).
A
ti4000a
4Trigger gun, spraying material back into hopper (C).
ti4294a
• The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
ti4296a
• Do not modify plug! If it will not fit in outlet, have grounded out- let installed by a qualified elec- trician.
• Sprayer model electric require- | ti4297a | |
ments are provided on page 2. |
| |
Extension Cords |
| |
• Only use an extension cord with | Ground | |
an undamaged | ||
| ||
• For up to 100 ft (30.48 m) cord, |
| |
use |
| |
minimum. | ti4295a |
310645K | 7 |
