Graham Field 9000APS Standard Mattress Retainer Installation, Head Retainer Installation

Zenith aps seRies

STANDARD MATTRESS RETAINER INSTALLATION

STEP 1. HEAD RETAINER INSTALLATION

1.Position retainer with curved end toward headboard.

2.Squeeze ends of the retainer toward the inside of the bed and lower between the deck rails and first outside grid wires.

3.Align the ends of retainer with small holes on the inside of deck rails and slowly release.

STEP 2. FOOT-END RETAINER

INSTALLATION

1. Position retainer with curved end toward footboard.

2. Squeeze ends of the retainer toward the inside of the bed and lower between the deck rails and first outside grid wires.

3. Align the ends of retainer with small holes on the inside of deck rails and slowly release.

STEP 3. RETAINER POSITIONS

•FOR 80” BEDS: Use outside small holes. See sample at right.

•FOR 76” BEDS: Use inside small holes. See sample at right.

!Be sure to use a mattress that is properly sized to fit the sleep deck, which will remain centered on the deck relative to State and Federal Guidelines. Use of an improperly fitted mattress could result in injury or death.

Basic American Medical Products, a division of GF Health Products, Inc.

!Use a properly sized mattress in order to minimize the gap between the side of the mattress and assist devices. This gap must be small enough to prevent resident/patient from getting his/her head or neck caught in this location.

	12
www.grahamfield.com	999-0831-190A Service Manual