Grandstream Networks 005261-0 Alternator Ac Lead Connections, ‹Four-Lead, Single-Phasestator

Models: 005261-0

1 64
Download 64 pages 37.86 Kb
Page 12
Image 12
ALTERNATOR AC LEAD CONNECTIONS

Stationary Emergency Generator

General Information

ALTERNATOR AC LEAD CONNECTIONS

See “Voltage Codes”. This Stationary Emergency Generator may be rated at any one of three voltages, either single-phase or three-phase. The electrical wires in the unit’s AC connection (lower) panel should be installed according to the number of leads and the voltage/phase required for the application. If there are any questions regarding lead connection, refer to the wiring diagrams at the back of this manual.

Voltage codes apply to the type of stator assembly installed on a particular generator.

‹FOUR-LEAD, SINGLE-PHASE STATOR

Four-lead alternators (see Figure 7.1) are designed to supply electrical loads with voltage code “A” (240V, 1-phase, 60 Hz). Electrical power is produced in the stator power windings. These windings were con- nected at the factory to the main circuit breaker as shown in Figure 7.1.

The rated voltage between each circuit breaker ter- minal is 240V. The rated voltage between each circuit breaker terminal and the neutral point 00 is 120V.

ALTERNATOR POWER WINDING CONNECTIONS

‹3-PHASE ALTERNATORS

The Stationary Emergency Generator is designed to supply 3-phase electrical loads. Electric power is produced in the alternator power windings. These windings were connected at the factory to the main circuit breaker with a “Y” configuration as shown in Figures 7.2 and 7.3.

The rated voltage between circuit breaker terminals E1-E2, E1-E3 and E2-E3 is either 480V or 208V depending on the model.

The rated voltage between each circuit breaker termi- nal and the neutral point 00 is either 277V or 120V depending on the model.

Figure 7.2 — Stator Power Winding

Connections - 3-phase, 277/480V (6 Lead)

S1 E1

Figure 7.1 — Four-lead, Single-phase Stator

INTERNAL

 

 

 

CONNECTIONS

 

 

 

 

 

 

L-L

S6

S4

 

 

 

NEUTRAL

 

 

 

 

 

S5

 

E3 S3

 

S2

E2

 

 

‹FOUR-LEAD, SINGLE-PHASE STATOR L-N ALTERNATOR POWER WINDING CONNECTIONS

Figure 7.3 — Stator Power Winding
Connections - 3-phase, 120/208V (6 Lead)

E1

S1 ‹3-PHASE ALTERNATORS S1

 

S4

 

S4

 

L-L

 

 

00 (NEUTRAL)

 

S6

 

S5

 

 

 

 

S3

S6

S5

 

S2

 

 

 

 

E3

S3

 

 

E2

 

 

 

S2

L-N

7-1

10/08 A .Rev ACConn001

Page 12
Image 12
Grandstream Networks 005261-0 Alternator Ac Lead Connections, Alternator Power Winding Connections, ‹3-PHASEALTERNATORS