Allow DHCP

 

DHCP Option 42 specifies a list of IP addresses for Network Time Protocol

 

 

Option 42 to

 

(NTP) servers available to the client. If you choose yes, BT200 will use the

 

 

override NTP

 

NTP servers resolved from DHCP, instead of the one you specified in the

 

 

server

 

"NTP Server" option above.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Distinctive

 

Customer Ring Tone 1 to 3 with associate Caller ID: when selected, if Caller

 

 

Ring Tone

 

ID is configured, then the device will ONLY sound this ring tone when the

 

 

 

 

incoming call is from the Caller ID, device will use System Ring Tone for all

 

 

 

 

other calls.

 

 

 

 

When selected but no Caller ID is configured, the selected ring tone will be

 

 

 

 

used for all incoming calls.

 

 

 

 

 

 

 

 

 

 

 

 

Disable Call

 

Default is No.

 

 

Waiting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Quick IP Call

 

This model has the ability to dial an IP address under the same LAN segment

 

 

Mode

 

by simply pressing the last octet in the IP address.

 

 

 

 

In the Advanced Settings page there is an option "Use Quick IP-call mode",

 

 

 

 

by default it is set to No. When this option is set to YES, and #XXX is

 

 

 

 

dialed, where X is 0-9 and XXX <=255, phone will make direct IP call to

 

 

 

 

aaa.bbb.ccc.XXX where aaa.bbb.ccc comes from the local IP address

 

 

 

 

REGARDLESS of subnet mask.

 

 

 

 

#XX or #X are also valid so leading 0 is not required (but OK).

 

 

 

 

eg.

 

 

 

 

192.168.0.2 calling 192.168.0.3 just dial #3 follow by SEND or #

 

 

 

 

192.168.0.2 calling 192.168.0.23 just dial #23 follow by SEND or #

 

 

 

 

192.168.0.2 calling 192.168.0.123 just dial #123 follow by SEND or #

 

 

 

 

192.168.0.2 dial #3 and #03 and #003 has same effect --> call 192.168.0.3

 

 

 

 

Note:- If you have a SIP Server configured, Direct IP-IP call will still work.

 

 

 

 

However, if you are using STUN, Direct IP-IP call will also use STUN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lock keypad

 

If this parameter is set to “Yes”, the configuration updates via keypad for

 

 

update

 

Menu Item 7, 9, 12 are disabled.

 

 

 

 

 

 

 

 

 

 

 

36

Page 36
Image 36
Grandstream Networks 200 Option 42 to, Override NTP, Distinctive, Ring Tone, Disable Call, Waiting Quick IP Call, Mode