Update
All Rights Reserved Grandstream Networks, Inc. 2004, 2005
End User
Password
IP Address
Time Zone
Daylight Savings Time
Date Display Format
Device Mode
WAN side http access
Reply to ICMP on WAN port
This contains the password to access the Web Configuration Menu. This field is case sensitive with a maximum length of 25 characters.
There are two modes under which the BudgeTone 200 can operate:
•If DHCP mode is enabled, then all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The BudgeTone 200 will acquire its IP address from the first DHCP server it discovers from the LAN it is connected.
•To use the PPPoE feature the PPPoE account settings need to be set. The BudgeTone 200 will attempt to establish a PPPoE session if any of the PPPoE fields is set.
•If Static IP mode is enabled, then the IP address, Subnet Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields will need to be configured. These fields are set to zero by default.
This parameter controls how the date/time is displayed according to the specified time zone.
This parameter controls whether the time will be displayed in daylight savings time or not. If set to “Yes”, then the displayed time will be 1 hour ahead of normal time.
Allow user to choose among the following three formats:
This parameter controls whether the device is working in NAT router mode or Bridge mode. Need save the setting and reboot the device before the setting start to work.
If set to “Yes”, user can access the configuration page through the WAN port, instead of connecting PC and BT200 through the “PC” port to do the configuration. On the other hand, it exposes the BT200 to others, and may cause some security issues for users. Default is No.
If set to “Yes”, The BT200 will respond to the PING command from other computers for testing, but it also is vulnerable to the DOS attack. Default is No.
28
