Grandstream Networks GXP-2020 user manual Speed Dial

i.Hand-free option

1.Press the CALL RETURN soft-key

ii.Hand-set option

1.Take the Handset off-hook

2.Press the CALL RETURN soft-key

4.USING THE CALL HISTORY: To call the a phone number in the phone’s history

When using the call history, the phone will use the same SIP account as was used for the last call/call attempt. Thus, when returning a call made to the third SIP account, the phone will use the third SIP account return the call.

•Press the MENU button to bring up the Main Menu.

•Select Call History and then “Received Calls”, “Missed Calls” or “Dialed Calls” depending on your needs

•Select phone number using the arrow keys

•Press OK to select

•Press OK again to dial.

5.USING THE PHONEBOOK: Calling a phone in from the phone’s phonebook.

Each entry in the phonebook can be attached to an individual SIP account. The phone will use that SIP account to make the phone call.

•Go to the phonebook by:

i.Pressing the phonebook button (bottom, left-hand side of phone), or

ii.Pressing the DOWN arrow key, or

iii.Pressing the menu button and Selecting “Phone book” and Press MENU

•Select the phone number by using the arrow keys

•Press OK so select

•Press OK again to dial.

6.PAGING/INTERCOM:

The paging/intercom function can only be used if the SERVER/PBX supports this feature and both the phones and PBX are correctly configured.

•Take the Handset/SPEAKER/Headset off-hook,

•Select the LINE key associated with account

•Press OK key to display LCD: LINEx: PAGE USING.

•Dial the phone number you want to Page/Intercom

•Press SEND key.

NOTE: Dial-tone and dialed number display occurs after the handset is off-hook and the line key is selected. The phone waits 4 seconds (by default; no key entry timeout) before sending and initiating the call. Press the “SEND” button to override the 4 second delay.

SPEED DIAL

The seven multi-functional buttons, located on the right-hand-side of the phone, can be configured for speed dial. Press the speed dial button to automatically call the assigned extension.

Note: The multi-functional buttons will function as LINE keys when all six primary lines are busy. The LED will flash indicating the incoming call. Press the button to pick up the call. If any one of the 7 functions keys is associated with a call, the speed dial/BLF function will not work.

For example: When first multi-functional button is in use, it cannot be used for speed dial/BLF.

Grandstream Networks, Inc.	GXP–2020 Users Manual	Page 15 of 33
	Firmware 1.1.4.3	Last Updated: 05/2007