Table 10: Device Configuration - Status Definitions
|
|
|
|
| Hardware Revision |
| Hardware version number: Main Board, Interface Board |
|
|
|
|
|
|
|
|
| MAC Address |
| The device ID, in HEXADECIMAL format. |
|
|
|
|
|
|
|
|
| IP Address |
| This field shows IP address of |
|
|
|
|
|
|
|
|
| Product Model |
| This field contains the product model information. |
|
|
|
|
|
|
|
|
| Software Version |
| • Program: This is the main software (firmware) release number, always used to |
|
|
| identify the software (firmware) system of the phone. |
|
|
| • Boot: Booting code version number |
|
|
|
|
|
|
|
|
|
|
|
|
| System Up Time |
| This field shows system up time since the last reboot. |
|
|
|
|
|
|
|
|
| Registered |
| Indicates whether accounts are registered to the related SIP server(s). |
|
|
| support four unique SIP profiles. |
|
|
|
|
|
|
|
|
| PPPoE Link Up |
| Inidicates whether the PPPoE connection is enabled (connected to a modem). |
|
|
|
|
|
|
|
|
Table 11: Device Configuration – Basic Settings Definitions
|
|
|
|
|
|
| End User |
| This contains the password to access the Web Configuration Menu. This field is | ||
| Password |
| case sensitive with a maximum length of 25 characters. | ||
|
|
|
|
|
|
|
|
|
|
| |
| IP Address |
| There |
| |
|
|
| 1. | DHCP mode: all the field values for the Static IP mode are not used (even |
|
|
|
|
| though they are still saved in the Flash memory.) The |
|
|
|
|
| its IP address from the first DHCP server it discovers on its LAN. The |
|
|
|
|
| DHCP option is reserved for NAT router mode. To use the PPPoE feature, |
|
|
|
|
| set the PPPoE account settings. The |
|
|
|
|
| session if any of the PPPoE fields are set. |
|
|
|
| 2. | Static IP mode: configure all of the following fields: IP address, Subnet |
|
|
|
|
| Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2 |
|
|
|
|
| (secondary). These fields are set to zero by default. |
|
|
|
|
|
|
|
|
|
|
| ||
| Multi purpose key |
| These options are used to assign a function to the corresponding multi purpose key. |
| |
|
|
| Options available are: “Speed dial”, “Asterisk BLF”, “Presence Watcher” and |
| |
|
|
| “Eventlist BLF”. |
| |
|
|
| Each function is connected to one of the 6 accounts and has a target user ID. |
| |
|
|
|
|
|
|
|
|
|
| ||
| Time Zone |
| This parameter controls the date/time display according to the specified time zone. |
| |
|
|
|
|
|
|
|
|
|
| ||
| Daylight Savings Time |
| This parameter controls time displayed in daylight savings time or not. If set to |
| |
|
|
| “Yes”, then the displayed time will be 1 hour ahead of normal time. |
| |
|
|
|
|
|
|
|
|
|
| ||
| Time Display Format |
| LCD time display in 12 hour or 24 hour format |
| |
|
|
|
|
|
|
|
|
|
| ||
| Date Display Format |
| Choose one of the following formats: |
| |
|
|
| • |
| |
|
|
| • |
| |
|
|
| • |
| |
|
|
|
|
|
|
Grandstream Networks, Inc. | Page 24 of 33 | |
| Firmware 1.1.4.3 | Last Updated: 05/2007 |
