Grandstream Networks GXP-2020 user manual Initiate a Conference Call, End Conference

5-WAY CONFERENCING

The GXP-2020 can host conference calls and supports 5-way conference calling.

1.Initiate a Conference Call:

ƒEstablish a connection with two or more parties

ƒPress CONF button

ƒChoose the desired line to join the conference by pressing the corresponding LINE button.

ƒRepeat step 2 and 3 for all parties that you want to join the conference. This can be done at any time, thus also if a n

2.Cancel Conference: Canceling establishing conference call.

ƒIf after pressing the “CONF” button, a user decides not to conference anyone, press CONF again or the original LINE button.

ƒThis will resume two-way conversation.

3.End Conference:

ƒPress HOLD to end the conference call and put all parties on hold;

ƒTo speak with an individual party, select the corresponding blinking LINE.

CHECK VOICE MESSAGES (MESSAGE WAITING INDICATOR)

The blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Press the MSG button to retrieve the message. An IVR will prompt the user through the process of message retrieval. Press a specific LINE to retrieve messages for a specific line account.

NOTE:

•Each line has a separate voicemail account. Each account requires a voicemail portal number to be configured in the “voicemail user id” field.

•To check which line account has a message 1) press the message button (this always checks the primary account), 2) check each line for stutter tone or 3) check missed calls using the menu.

ASTERISK BUSY LAMP FIELD

The seven multi-functional buttons can be configured for Asterisk Busy Field function with a specified account. When Asterisk BLF is configured on one of the multi-functional buttons, the Speed Dial function will work when it that line is not in use.

Grandstream Networks, Inc.	GXP–2020 Users Manual	Page 18 of 33
	Firmware 1.1.4.3	Last Updated: 05/2007