Grandstream Networks user manual Configuring the GXV3601 via Web Browser

GXV3601 IP Camera

Configuring the GXV3601 via Web Browser

The GXV3601’s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow you to configure your IP camera through Microsoft Internet Explorer.

Access GXV3601 Web Configuration Menu

Connect the Camera to DHCP server.

1.Navigate your browser to:

http://www.grandstream.com/support/gxv_series_surveillance/general/resources/gs_ search.zip

2.Run the Grandstream GS_Search tool, that you just downloaded.

3.Click on button in order to begin device detection

4.The detected devices will appear in the Output field

5.Start Internet Explorer on your computer.

6.Enter device IP in the address bar of the browser.

7.Enter the administrator user name and password to access the Web Configuration Interface

8.The default user name and password are both set to admin.

9.IE will indicate that “This website wants to install the following add-on: ‘GSViewerX.cab’ from ‘Grandstream Networks Inc’.” Install this add-on by following the instructions in IE.

10.You will see the home page.

Firmware 1.0.4.6	Page 13 of 36
Grandstream Networks, Inc.	09/2010