SERVICE TRANSMISSION

c

IMPORTANT: Avoid Damage! Do not add oil beyond FULL mark. Oil capacity after draining may be less than dry fill capacity. Check oil level before filling completely.

NOTE: Dry fill capacity for hydraulic system is 3.1L (3.3 qt).

10.Fill oil reservoir with approximately 1.9L (2 qt) of oil.

11.Insert dipstick. Tighten cap.

12.Start engine.

13.Move throttle lever to 1/2 to 2/3 position.

14.Unlock park brake.

c

CAUTION: Avoid injury! Help prevent serious bodily injury. Remain alert to other people and the surroundings when operating the machine.

15.Cycle motion control levers forward and rearward several times. Check for leaks around filter.

16.Stop engine. Check oil level. Add oil as necessary to bring oil level to FULL mark on dipstick.

Cleaning Hydraulic Oil Pump Cooling Fins

c

CAUTION: Avoid injury! Compressed air can cause debris to fly a long distance.

•Clear work area of bystanders.

•Wear eye protection when using compressed air for cleaning purposes.

•Reduce compressed air pressure to 210 kPa (30 psi).

IMPORTANT: Avoid Damage! To ensure proper cooling, keep the cooling fins clean at all times. Operating the machine with obstructed cooling fins could cause damage due to overheating.

1. Park machine safely. (See Parking Safely in the SAFETY section.)

MX20126

2.Remove four cap screws (A).

3.Remove rear shield (B) to access hydraulic pumps (C).

4.Clean hydraulic oil cooling fins on each hydraulic pump with a rag, brush or compressed air.

5.Clean area around hydraulic pumps and frame.

Checking and Replacing Pump Traction Drive Belt

c

CAUTION: Avoid injury! Fingers or loose clothing can get caught in rotating parts. Stop engine and wait for all moving parts to stop before servicing.

NOTE: The traction drive belt will not require a tension adjustment. Belt is self-adjusted using a spring tensioner.

Checking Traction Drive Belt:

1. Park machine safely. (See Parking Safely in the SAFETY section.)

MX20126

2.Remove four cap screws (A).

3.Remove rear shield (B).

MX20111

4.Inspect belt (C) through frame openings (D) for excessive wear, damage or stretching.

Removing Traction Drive Belt:

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Remove mower deck drive belt. (See Replacing Mower Deck Drive Belt in the SERVICE MOWER section.)

Service Transmission - 22

Page 23 Page 25
Page 24
Image 24
Great Dane GSKH2561S, GSKW1948S Cleaning Hydraulic Oil Pump Cooling Fins, Checking and Replacing Pump Traction Drive Belt
Page 23 Page 25

GSKH2561S, GSKH2352S, GSKH1848S, GSKW2352S, GSKW1948S specifications

Great Dane has established itself as a leader in the manufacturing of high-quality trailers, and models like the GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, and GSKH2561S showcase the company's commitment to innovation and durability. These models are designed to meet the evolving needs of the transportation industry, offering a blend of advanced technology, superior materials, and customizable features.

The GSKW1948S and GSKW2352S are known for their enhanced weight distribution and aerodynamics. Equipped with lightweight materials, these models help increase payload capacity while ensuring fuel efficiency. The aerodynamic design minimizes drag, ultimately leading to reduced fuel consumption, which is a significant cost-saving advantage for fleet operators.

In contrast, the GSKH1848S, GSKH2352S, and GSKH2561S are tailored for heavier loads while maintaining structural integrity and safety. These models utilize high-strength steel and advanced welding techniques to ensure they withstand the rigors of long-haul transportation. Additionally, these trailers have a robust suspension system that provides a smooth ride, reducing wear and tear on both the vehicle and the cargo.

All five models come equipped with state-of-the-art technology, featuring telematics systems that allow for real-time monitoring of trailer performance and location. This feature enables fleet managers to optimize routes and improve operational efficiency. Moreover, each model boasts easy access points for maintenance, aiding in reducing downtime and overall operating costs.

Great Dane trailers also prioritize safety with features like anti-lock braking systems and enhanced visibility lighting. The design not only meets but often exceeds industry standards for safety, providing peace of mind to operators who need to transport goods across long distances.

In conclusion, the GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, and GSKH2561S models reflect Great Dane’s commitment to quality and innovation. With their combination of lightweight design, advanced technology, and safety features, these trailers offer reliable solutions for businesses seeking to optimize their logistics and transportation services. Investing in a Great Dane trailer means investing in efficiency, safety, and durability.
Top Page Image Contents