SERVICE MOWER

MX20122

Picture Note: Mower deck with side discharge used for illustration.

3.

Measure distance (A) between blade tip and flat ground surface.

4.

Rotate blade 180° and measure distance between other blade tip and

flat ground surface.

5.

Install new blade if the difference between the two measurements is

&

$

%

more than 3 mm (1/8 in.).

6. Repeat for all blades.

Checking and Replacing Mower Blades

c

CAUTION: Avoid injury! Do not work near raised mower deck unless it is safely supported.

Mower blades are sharp. Wrap blades or wear gloves when servicing.

Before performing any service function, wait for all moving parts to stop turning.

Disconnect battery or remove spark plug wire before making repairs.

IMPORTANT: Avoid Damage! When replacing mower blades, always use genuine Great Dane Service Parts.

NOTE: Only replace blades. Never straighten or weld them.

Checking Mower Blades

1.Park machine safely. (See Parking Safely in the Safety Section).

2.Raise the mower deck to the transport position (also the 12.7 cm [5 in.] cutting height position).

3.Raise front of machine with a safe lifting device.

•Support with jack stands and/or wooden blocks.

4.Check mower blades:

•Mower blades should be sharp and free of any damage.

•Inspect blades; sharpen/balance or replace as necessary.

Replacing Mower Blades

1.Remove blade bolt (A), three 1/4 in. washers (B) and blade (C).

2.Install replacement blade:

• Blade wing must face toward top of mower deck.

c

IMPORTANT: Avoid Damage! When installing the blade:

•Make sure the blade is properly seated on the spindle.

•Make sure the concave side of the large washer faces towards the blade.

•Install blade bolt (A), blade (B) and three 1/4 in. washers (C).

•Tighten blade bolt to 163 N•m (120 lb-ft).

3.Lower machine.

4.Adjust mower deck to a desirable cutting height.

Sharpening Blades

c

CAUTION: Avoid injury! Mower blades are dangerous! Always wear gloves while working on blades. Always wear safety eye protection when grinding.

• Sharpen blades with grinder, hand file, or electric blade sharpener.

A

B

MIF

Service Mower - 28

Page 29 Page 31
Page 30
Image 30
Great Dane GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, GSKH2561S manual Checking and Replacing Mower Blades, Sharpening Blades
Page 29 Page 31

GSKH2561S, GSKH2352S, GSKH1848S, GSKW2352S, GSKW1948S specifications

Great Dane has established itself as a leader in the manufacturing of high-quality trailers, and models like the GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, and GSKH2561S showcase the company's commitment to innovation and durability. These models are designed to meet the evolving needs of the transportation industry, offering a blend of advanced technology, superior materials, and customizable features.

The GSKW1948S and GSKW2352S are known for their enhanced weight distribution and aerodynamics. Equipped with lightweight materials, these models help increase payload capacity while ensuring fuel efficiency. The aerodynamic design minimizes drag, ultimately leading to reduced fuel consumption, which is a significant cost-saving advantage for fleet operators.

In contrast, the GSKH1848S, GSKH2352S, and GSKH2561S are tailored for heavier loads while maintaining structural integrity and safety. These models utilize high-strength steel and advanced welding techniques to ensure they withstand the rigors of long-haul transportation. Additionally, these trailers have a robust suspension system that provides a smooth ride, reducing wear and tear on both the vehicle and the cargo.

All five models come equipped with state-of-the-art technology, featuring telematics systems that allow for real-time monitoring of trailer performance and location. This feature enables fleet managers to optimize routes and improve operational efficiency. Moreover, each model boasts easy access points for maintenance, aiding in reducing downtime and overall operating costs.

Great Dane trailers also prioritize safety with features like anti-lock braking systems and enhanced visibility lighting. The design not only meets but often exceeds industry standards for safety, providing peace of mind to operators who need to transport goods across long distances.

In conclusion, the GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, and GSKH2561S models reflect Great Dane’s commitment to quality and innovation. With their combination of lightweight design, advanced technology, and safety features, these trailers offer reliable solutions for businesses seeking to optimize their logistics and transportation services. Investing in a Great Dane trailer means investing in efficiency, safety, and durability.
Top Page Image Contents