Manuals / Great Dane / Lawn and Garden / Lawn Mower

Great Dane GSKH2561S, GSKW1948S, GSKW2352S Operating, Avoid Damage to Plastic and Painted Surfaces

Models: GSKH2561S GSKH2352S GSKH1848S GSKW2352S GSKW1948S

1 78
Download 78 pages 9.98 Kb
Page 9
Image 9

OPERATING

•Prevent fire and explosion caused by static electric discharge. Static electric discharge can ignite fuel vapors in an ungrounded fuel container.

•Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before fueling.

•Remove fuel-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a fuel dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until the fueling is complete. Do not use a nozzle lock- open device.

•Never overfill fuel tank. Replace fuel tank cap and tighten securely.

•Replace all fuel container caps securely after use.

•For gasoline engines, do not use gas with methanol. Methanol is harmful to your health and to the environment.

Handling Waste Product and Chemicals

•Waste products, such as, used oil, fuel, coolant, brake fluid, and batteries, can harm the environment and people:

•Do not use beverage containers for waste fluids - someone may drink from them.

•See your local Recycling Center or authorized dealer to learn how to recycle or get rid of waste products.

•A Material Safety Data Sheet (MSDS) provides specific details on chemical products: physical and health hazards, safety procedures, and emergency response techniques. The seller of the chemical products used with your machine is responsible for providing the MSDS for that product.

Operating

Daily Operating Checklist

Make sure all necessary guards and shields are safely and securely attached. Check for loose, missing, or damaged parts.

Remove mower deck belt shields. Clean grass and debris from belt area.

Remove grass and debris from machine and mower deck.

Remove grass and debris from operator station foot plate, pump drive belt compartment, hydraulic pump and pump mounting plate.

Test park brake.

Test safety systems.

Check battery.

Check for oil leaks.

Check engine oil and hydraulic oil levels.

Check all belts for damage or cracking.

Check engine air filter.

Check mower level.

Adjust cutting height if necessary.

Check wheel bolt torque. Tighten if necessary.

Check tire air pressure. Check tires for damage or cracking. Check and adjust speed control linkages and lock.

Avoid Damage to Plastic and Painted Surfaces

•Do not wipe plastic parts unless rinsed first.

•Insect repellent spray may damage plastic and painted surfaces. Do not spray insect repellent near machine.

•Be careful not to spill fuel on machine. Fuel may damage surface. Wipe up spilled fuel immediately.

•Prolonged exposure to sunlight will damage the hood surface.

Operator Station Controls

MX20138

Picture Note:

A-Speed Control Bar Lock

B-Speed Control Bar

C-Left Motion Control Lever

D-Right Motion Control Lever

E-Hydrostatic Oil Reservoir Cap and Dipstick

F-Ignition Key Switch

G-Fuel Tank Cap

H-PTO Switch

I-Optional Light Switch Location

J-Hourmeter

Operating - 7

Page 8 Page 10
Page 9
Image 9
Great Dane GSKH2561S, GSKW1948S manual Operating, Avoid Damage to Plastic and Painted Surfaces, Operator Station Controls
Page 8 Page 10

GSKH2561S, GSKH2352S, GSKH1848S, GSKW2352S, GSKW1948S specifications

Great Dane has established itself as a leader in the manufacturing of high-quality trailers, and models like the GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, and GSKH2561S showcase the company's commitment to innovation and durability. These models are designed to meet the evolving needs of the transportation industry, offering a blend of advanced technology, superior materials, and customizable features.

The GSKW1948S and GSKW2352S are known for their enhanced weight distribution and aerodynamics. Equipped with lightweight materials, these models help increase payload capacity while ensuring fuel efficiency. The aerodynamic design minimizes drag, ultimately leading to reduced fuel consumption, which is a significant cost-saving advantage for fleet operators.

In contrast, the GSKH1848S, GSKH2352S, and GSKH2561S are tailored for heavier loads while maintaining structural integrity and safety. These models utilize high-strength steel and advanced welding techniques to ensure they withstand the rigors of long-haul transportation. Additionally, these trailers have a robust suspension system that provides a smooth ride, reducing wear and tear on both the vehicle and the cargo.

All five models come equipped with state-of-the-art technology, featuring telematics systems that allow for real-time monitoring of trailer performance and location. This feature enables fleet managers to optimize routes and improve operational efficiency. Moreover, each model boasts easy access points for maintenance, aiding in reducing downtime and overall operating costs.

Great Dane trailers also prioritize safety with features like anti-lock braking systems and enhanced visibility lighting. The design not only meets but often exceeds industry standards for safety, providing peace of mind to operators who need to transport goods across long distances.

In conclusion, the GSKW1948S, GSKW2352S, GSKH1848S, GSKH2352S, and GSKH2561S models reflect Great Dane’s commitment to quality and innovation. With their combination of lightweight design, advanced technology, and safety features, these trailers offer reliable solutions for businesses seeking to optimize their logistics and transportation services. Investing in a Great Dane trailer means investing in efficiency, safety, and durability.