Grounding
In the event of an electrical short, grounding reduces the risk of electric shock. Improper con- nections of the
Electrocution or fire could result if this machine is not grounded correctly or if your electrical con- figuration does not com- ply with local and state codes. Ensure compliance by checking with a quali- fied electrician!
A fire may occur if your particular electrical configuration does not comply with local and state codes. The best way to ensure compli- ance is to check with your local municipality or a qualified electrician.
G0460/G0461 12" Sliding Table Saw
Rewiring to 440V
The Model G0461 can be rewired for 440V opera- tion. This rewiring job consists of disconnecting the saw from the power source, installing the magnetic switch assembly from the 440V conver- sion kit, and rewiring the motor.
The necessary components for this procedure can be purchased by calling our Customer Service number at (800)
Improperly wiring the machine may result in electrocution, fire, or machine damage. Get help from a qualified electrician when rewiring your machine.
To rewire the Model G0461 for 440V opera- tion:
1.DISCONNECT MACHINE FROM POWER!
2.Remove the motor cabinet cover shown in
Figure 7.
