Site Considerations
Floor Load
Most commercial floors are suitable for this machine. Residential floors may require additional reinforcement to support the machine and opera- tor. Refer to the Machine Data Sheet on Page 3 for details about the weight and foot print size.
Placement
Consider existing and anticipated needs, size of material to be processed through your machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your saw. See Figure 16 for the minimum operat- ing clearances of the Model G0460/G0461.
����
����
Figure 16. Operating clearances.
Moving & Placing
Base Unit
Use lifting straps with a 1500 lbs. minimum lifting capacity. If a lifting strap breaks, seri- ous personal injury may occur.
To remove the saw base unit from the crate pallet:
1.Remove the top of the crate and position the forklift forks together and directly above the saw.
2.Place two lifting straps (with hooks on the ends) over the forks and slide the hooks into the points shown in Figure 17.
Figure 17. Lifting the saw base unit.
DO NOT lift the table saw any higher than necessary to clear the floor. Serious per- sonal injury and damage to the machine may occur if safe moving methods are not followed.
3.Lift the saw base unit and move it to your predetermined location.
G0460/G0461 12" Sliding Table Saw |
