Grizzly G0460, G0461 owner manual Clean Up Inventory, Inventory Qty

Clean Up Inventory

The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or citrus-based degreaser such as Grizzly’s G7895 Citrus Degreaser. To clean thoroughly, some parts must be removed. For optimum performance from your machine, clean all moving parts or sliding contact surfaces. Avoid chlorine-based solvents, such as acetone or brake parts cleaner that may damage painted surfaces. Always follow the manufacturer’s instructions when using any type of cleaning product.

Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.

Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.

G7895—Grizzly Citrus Degreaser

This natural, citrus-based degreaser is a great solution for removing export grease, and it’s much safer to work around than nasty solvents.

Figure 10. Grizzly citrus degreaser.

-16-

After all the parts have been removed from the two boxes, you should have the following items included with the base unit of the saw:

Inventory		Qty
A.	Large Extension Wing	1
B. Small Extension Wing w/Set Screws		1
C.	Support Leg w/Hex Bolt & Nut	1

A B

C

Figure 11. Extension table components.

D.Round Rail w/M12 Studs,

	Washers, and Nuts	1
E.	Square Tube w/Scale	1
F.	Aluminium Rip Fence	1
G.	Rip Fence Body	1

D

E

F

G

Figure 12. Rip fence components.

G0460/G0461 12" Sliding Table Saw