Grizzly G0477 owner manual Inventory Figure Qty, Components and Hardware not shown

Inventory

After all the parts have been removed from the two boxes, you should have the following items:

Inventory (Figure 3)		Qty
A.	Long Frames	2
B.	Short Frames	2
C.	Plain Legs	2
D.	Notched Legs	2
E.	Long Braces	2
F.	Short Braces	2

A

F

E

B

D C

G. Planer/moulder (not shown) 1

Components and Hardware (not shown)

•	Roller Adjustment Wrench	1
•	Open-End Wrench 8/10mm	1
•	Rubber Grip Magnets	2
•	Hex Wrench 4mm	1
•	Dust Chute	1
•	Dust Chute Adapter	1
•	Dust Collection Bag	1
•	Bag Clamp	1
• Cap Screw M6-1 x 25		1
• Button Head Cap Screw M6-1 x 25		1
•	Crank Handle	1
•	Handle Plug	1
• Phillips Head Screw M6-1 x 25		1
• Cap Screws #10-32 x 23⁄8"		2
•	Flat Washers #10	2
• Wing Screws 1⁄4-20 x 11⁄4"		4
•	Flat Washers 1⁄4"	4
•	Threaded Guide Inserts	12
• Hex Bolts M8-1.25 x 80 (Stand)		4
• Flat Washers 8mm (Stand)		8
• Hex Nuts M8-1.25 (Stand)		4
• Carriage Bolts 5⁄16-18 x 3⁄4" (Stand)		24
• Flange Nuts 5⁄16-18 (Stand)		24

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed on the machine. Check these locations before assuming that any items from the inventory list are miss- ing.

Model G0477 15" Planer/Moulder

Figure 3. G0477 Inventory.

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.

The Model G0477 is a very heavy machine. Serious personal injury may occur if safe mov- ing methods are not fol- lowed. To be safe, you will need assistance when moving the ship- ping box and removing the machine from the box.

-11-