Grizzly G0514 owner manual Clean Up, Site Considerations, Floor Load, Placement Location

Clean Up

The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or degreaser, such as shown in Figure 10. For thorough cleaning, some parts must be removed.

For optimum performance, clean all moving parts or sliding contact surfaces. Avoid chlo- rine-based solvents, such as acetone or brake parts cleaner that may damage painted surfac- es. Always follow the manufacturer’s instructions when using any type of cleaning product.

Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.

Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.

G2544—Solvent Cleaner & Degreaser

H9692—Orange Power Degreaser

Great products for removing shipping grease.

Figure 10. Cleaner/degreasers available from

Grizzly.

-16-

Site Considerations

Floor Load

Refer to the Machine Data Sheet for the weight and footprint specifications of your machine. Some residential floors may require additional reinforcement to support both the machine and operator.

Placement Location

Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your new machine. See Figures 11 & 12 for the minimum working clearances.

('

('

Figure 11. G0513 minimum working clearances.

('

(+

Figure 12. G0514 minimum working clearances.

Model G0513/G0514 (Mfg. 8/02+)