Grizzly G0514 owner manual Inventory, Box 1 Figures Qty, Hardware and Tools not shown Qty

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Box 1: (Figures 8–9)		Qty
A.	Bandsaw (not shown)	.................................. 1
B.	Table	1
C.	Miter Gauge	1
D.	Back Square Tube	1

C

B

Figure 8. Inventory A.

E.	Front Rail	1
F.	Fence Assembly	1
G.	Guide Post Handwheel	1
Hardware and Tools (not shown):		Qty
•	Eye Bolt M10-1.5 (may be installed)	1

•Flat Washers 8mm

	(Table)	4
• Lock Washers 8mm (Table)		4
• Hex Bolts M8-1.25 x 16 (Table)		4
•	Hex Bolt M8-1.25 x 90 (Pos. Stop)	1
•	Hex Nuts M8-1.25 (Pos. Stop, Fence)	2

D

E

G

F

•	Table Pin	1
•	Table Insert	1
• Cap Screws M6-1 x 16 (Fence)		2
• Hex Bolts M6-1 x 20 (Fence)		2
• Fence Handle M8-1.25 x 22 (Fence)		1
• Lock Washers 6mm (Fence)		2
• Flat Washers 6mm (Fence)		2
• Rail Pad M6 x 18 (Fence)		1
• Hex Nut M6-1 (Fence)		1
• Hex Wrench 5mm & 8mm		1 Ea
• Open End Wrench 10 x 13mm		1

-14-

Figure 9. Inventory B.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

SUFFOCATION HAZARD!

Immediately discard all plas- tic bags and packing materi- als to eliminate choking/suf- focation hazards for children and animals.

Model G0513/G0514 (Mfg. 8/02+)