Grizzly G0517g instruction manual G9765-9-PC. Ball End Mill Set, H3022-Measurement Tool Set

G9765—9-PC. Ball End Mill Set

Features 2 flute ball nose end mills. Includes the following sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4".

Figure 38. G9765 9 PC. Ball End Mill Set.

H3022—Measurement Tool Set

Includes magnetic base, 1" dial indicator (.001"), and 6" dial caliper (.001"). The extremely low price has made this a very popular seller!

Figure 39. H3022 Measurement Tool Set.

G2861—21⁄2" Face Mill w/R-8 Arbor

G2863—MT#3 Arbor for Face Mill

This 21⁄2" Face Mill accepts four carbide inserts. The Model G2863 must be purchased with this face mill for use on this mill/drill.

Figure 40. G2861 Face mill.

Model G0517 Mill/Drill

G5608—MT#3, 3⁄16" Shank End Mill Holder

G5609—MT#3, 3⁄8" Shank End Mill Holder

G0510—MT#3, 1⁄2" Shank End Mill Holder

G0511—MT#3, 5⁄8" Shank End Mill Holder

G0512—MT#3, 3⁄4" Shank End Mill Holder

All the above use an M12-1.75 drawbar.

Figure 41. End mill holder.

G9760—20-PC. 2 & 4 Flute TiN End Mill Set. Includes 2 & 4 flute styles of these sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/8", 11/16", and 3/4".

Figure 42. G9760 20-PC End Mill Set.

G1076—52-PC. Clamping Kit

This clamping kit includes 24 studs, 6 step block pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts, and 6 end hold-downs. The rack is slotted so it can be mounted close to the machine for easy access.

Figure 43. G1076 52-PC. Clamping Kit.

-23-