Changing Motor
Voltage
The Model G0518 comes from the factory prewired to operate at 110V. The motor can also be wired to operate at 220V. Before changing the running voltage to 220V, review Page 7 and make sure you have a suitable 220V power source.
To change the running voltage:
1.Unplug the machine from the power source!
2.Remove the 4 bolts that secure the motor assembly to the stand.
3.Carefully lift the motor assembly from the stand and lay it on its side to reveal the elec- trical wires shown in Figure 27.
!
Figure 27. G0518 Wiring.
4.Follow the wiring diagram in Figure 28 to wire the Model G0518 for 110V.
Figure 28. G0518 110V wiring.
5.Follow the wiring diagram in Figure 29 to wire the Model G0518 for 220V.
Figure 29. G0518 220V wiring.
6.Re-assemble the machine when finished.
|
|
|
|
|
|
|
|
|
|
|
|
| G0518 Drum / Flap Sander | ||
