Manuals / Grizzly / Power Tools / Saw

Grizzly G0555X owner manual Wheel Alignment, To verify if the upper and lower wheels are coplanar

Models: G0555X

1 60
Download 60 pages 45.77 Kb
Page 43
Image 43

3.Clamp the board to the bandsaw table with- out moving it. Now slide the fence over to the board so it barely touches one end of the board.

4.Loosen the four cap screws on top of the fence.

5.Skew the fence as needed until it is parallel to the edge of the scrap piece. You may need to re-adjust the fence locking mechanisms to gain maximum adjustment.

6.While maintaining the skew, tighten the cap screws.

To compensate for lead when making straight crosscuts with the miter gauge, you will need to shift the table:

1.Set the miter gauge to 90°.

2.On a scrap piece of wood, mark a line that is perpendicular to the front edge. Starting where the line begins, cut the board by push- ing it through the blade with the miter gauge. The miter gauge should be checked for square before beginning this procedure.

3.Loosen the table mounting bolts, and shift the table to compensate for the blade lead.

4.Repeat Steps 1 & 2 until the blade cuts straight when wood is pushed through with the miter gauge.

NOTICE

If the table is shifted, the fence will be affected since it is attached.

NOTICE

Lead adjustments will change when new blades are mounted on the saw.

G0555X 14" Extreme Series Bandsaw

Wheel Alignment

Wheel alignment is one of the easiest ways to ensure you get optimal performance from your bandsaw. When wheels are aligned, or coplanar, the bandsaw is more likely to cut straight without wandering; and vibration, heat, and blade wear are considerably decreased because the blade is automatically balanced on the wheel. This is known as “Coplanar Tracking."

To verify if the upper and lower wheels are coplanar:

1.DISCONNECT BANDSAW FROM POWER!

2.With the blade on and properly tensioned, hold a straightedge close to the center of both wheels. Make sure the straightedge fully extends across the wheels as shown in Figure 46.

Figure 46. Checking wheel alignment with a

straightedge.

—If the wheels are coplanar, the straightedge wil touch the top and bottom of the outside rims on each wheel.

—If your wheels are not coplanar, place the straightedge on the lower wheel first— ensuring that it touches both the top and bottom rim—and adjust the tracking knob to see how the upper wheel lines up with the straightedge.

-41-

Page 42 Page 44
Page 43
Image 43
Grizzly G0555X owner manual Wheel Alignment, To verify if the upper and lower wheels are coplanar
Page 42 Page 44

G0555X specifications

The Grizzly G0555X is a benchmark scroll saw that stands tall among woodworking enthusiasts and professionals alike. This versatile tool is designed to offer precision and efficiency when it comes to intricate cutting tasks, making it an essential addition to any woodshop.

One of the standout features of the G0555X is its robust 1 HP motor. This powerful motor allows for smooth and consistent operation, ensuring that users can tackle both intricate and heavy-duty cutting tasks efficiently. With variable speed control ranging from 400 to 1200 SPM (strokes per minute), users can adjust the speed according to the specific requirements of their projects, providing flexibility for different materials and designs.

The G0555X is built with a cast-iron frame, which enhances stability and reduces vibrations during operation. This heavy-duty construction not only ensures longevity but also improves precision in cutting. The saw's adjustable table, which can tilt from 0 to 45 degrees, allows users to make angled cuts with ease, offering versatility for various applications.

Another impressive characteristic of the G0555X is its exceptional blade deviation capabilities. The tool can accommodate both pinless and pinned blades, giving users the freedom to choose the best blade for their cutting needs. The saw features an easy blade installation and tensioning system, enabling quick and hassle-free blade changes, a feature that saves time and increases productivity.

In addition to performance, the G0555X emphasizes safety. The saw is equipped with a transparent blade guard that allows for clear visibility of the cutting area, ensuring that users can maintain focus on their work without compromising safety. The dust port also plays a crucial role in maintaining a clean workspace, accommodating a standard 4-inch hose for efficient dust collection.

With its impressive specifications and user-friendly design, the Grizzly G0555X is an excellent choice for both hobbyists and professionals. Whether you're tackling delicate wooden crafts or robust furniture projects, this scroll saw is engineered to deliver accuracy, power, and reliability. The G0555X exemplifies what modern woodworking tools should offer, combining advanced technology with essential features to elevate the woodworking experience. Its reputation among users speaks volumes, making it a go-to option for anyone serious about their craft.