Assembly |
|
Components and Hardware Needed: | Qty |
Filters 16" x 25" x 1" | 2 |
Filters 16" x 25" x 2" | 2 |
Downdraft Plates | 10 |
Center Downdraft Plate | 1 |
Pins | 8 |
Left Center Panel | 1 |
Right Center Panel | 1 |
Left Panel | 1 |
Right Panel | 1 |
Handles | 2 |
Phillips Head Screws | 2 |
To assemble the downdraft downdraft table:
1.Install the 2" thick filters in the filter bay on both sides of the downdraft table cabinet as shown in Figure 5, then install the 1" thick filters in front of them.
Note: Be sure to remove the plastic wrap- ping from the filters before installing. Also, to ensure that the filters function correctly, orient the filters so the metal webbing points toward the impeller.
2" Filter
1" Filter |
|
|
|
|
|
|
| Rear of | |
|
|
|
| |
|
|
|
|
|
|
| Airflow |
| Filter |
Figure 5. Filters installed in filter bay (one side
shown).
2.Install the downdraft plates as shown in Figure 6, placing the thinner center down- draft plate in the middle.
Center
Downdraft
Plate
Figure 6. Installing downdraft plates.
3.Align the right and left center panels with the rear downdraft table hinges, and secure with four pins as shown in Figure 7.
Right | Pin |
Panel |
Left
Panel
Hinge
Figure 7. Center panels installed.
4.Fasten the center panels in the middle with the latches.
Left
Panel
|
| Right |
Latches |
| Panel |
|
|
|
Figure 8. Center panels secured with latches.
G0631 79" x 28" Downdraft Table |
