SECTION 6: MAINTENANCE
Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious person- al injury.
Schedule
For optimum performance from your machine, follow this maintenance schedule and refer to any specific instructions given in this section.
Daily Check:
•Check filters.
•Dust drawers.
•Loose mounting bolts.
•Worn or damaged wires.
•Any other unsafe condition.
Weekly Maintenance:
•Check filters.
•Dust drawers.
Monthly Check:
•Clean/vacuum dust buildup from inside cabi- net and off motors.
Cleaning
Cleaning the Model G0631 is relatively easy. Vacuum excess sawdust, and wipe off the remain- ing dust with a dry cloth. If any resin has built up, use a resin dissolving cleaner to remove it.
G0631 79" x 28" Downdraft Table
Filters
The filters may need to be serviced or replaced if suction is noticeably reduced. The amount of use has a direct bearing on how often you must ser- vice or change the 1" prefilter and 2" filter.
Keep the downdraft table unplugged during all maintenance procedures. Ignoring this warning may result in serious personal injury to you or others!
Always wear a dust mask and safety glasses when servicing and changing filters. Sawdust may cause allergic reactions or respiratory problems.
To service the filters:
1. DISCONNECT POWER TO THE DOWNDRAFT TABLE!
2. Remove the two outside downdraft plates, remove the filters, and gently knock the filters out inside a garbage can.
Note: Generally this technique will work two or three times, then you will have to replace the filter.
3.Reinstall the filters and the downdraft plates.
To change a filter:
1. DISCONNECT POWER TO THE DOWNDRAFT TABLE!
2.Remove the outside downdraft plates, remove the filters, install new filters, and reinstall the plates.
