g0671/g0672/g0673 dust Collector -19-
G0673 inventory
the following is a description of the main compo -
nents shipped with your machine. lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Contents (figures 9–11) Qty
a. Collectors ...................................................4
b. 5-in-1 inlet Adapter .....................................1
C. g0673 impeller housing with Motor ...........1
D. legs ............................................................4
E. leg Braces .................................................4
f. Casters .......................................................4
G. upper Filter Bags (fabric) ...........................4
h. lower Collection Bags (plastic) ..................4
i. hangers ......................................................4
J. hanger supports ........................................4
K. rubber gaskets .........................................4
L. Bag Clamps ................................................8
fasteners (where used) (not shown) Qty
• hex Bolts 5⁄16"-18 x 2
1⁄2" (legs) ....................8
• hex nuts 5⁄16"-18" (legs/collectors) ............40
• hex Bolts 5⁄16"-18 x 1⁄2" (leg braces) ..........16
• hex Bolts 5⁄16"-18 x 1" (collectors) ............. 32
• hex Bolts 1⁄4"-20 x 1⁄2" (hangers) ...............12
• Flat Washers 5⁄16" (collectors) ...................64
• phillips head screw 10-24 X 3⁄8" (inlet) ......1
figure 9. g0673 inventory 1.
A
B
C
deF
g
h
i
figure 10. g0673 inventory 2.
J
K
l
figure 11. g0673 inventory 3.
if any nonproprietar y par ts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.