-18- g0671/g0672/g0673 dust Collector
G0671/G0672 inventory
the following is a description of the main compo -
nents shipped with your machine. lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Contents (figures 7 & 8) Qty
a. Collectors ...................................................2
b. impeller housing with Motor .......................1
C. Casters .......................................................4
D. leg Braces .................................................4
E. legs ............................................................4
f. gaskets ......................................................2
G. 4-in-1 inlet Adapter .....................................1
h. hangers ......................................................2
i. hanger supports ........................................ 2
J. lower Collec tion Bags, g0671 (fabric) .......2
J. lower Collection Bags, g0672 (plastic) .....2
K. upper Filter Bags (fabric) ...........................2
fasteners (where used) (not shown) Qty
• hex Bolts 5⁄16"-18 x 2
1⁄2" (legs) ....................8
• hex nuts 5⁄16"-18 (legs/collectors) .............24
• hex Bolts 5⁄16"-18 x 1⁄2" (leg braces) ..........16
• hex Bolts 5⁄16"-18 x 1" (collectors) ............. 16
• hex Bolts 1⁄4"-20 x 1⁄2" (hangers) .................6
• Flat Washers 5⁄16" (collectors) ...................32
• phillips head screw 10-24 X 3⁄8" (inlet) ......1
• Bag Clamps (bags) ..................................... 4
figure 7. g0671/g0672 inventory 1.
d
C
A
B
e
figure 8. g0671/g0672 inventory 2.
F
g
h
i
J
K
if any nonproprietar y par ts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.