g0671/g0672/g0673 dust Collector -23-
8. secure the hanger into the hanger sup-
port with one (Model g0673) or two (Model
g0671/g0672) 1⁄4"-20 x 1⁄2" hex bolts (see
figure 18).
10. Align the hanger assembly so that the hook is
directly over the center of the collector.
11. repeat Steps 8–10 for the remaining hanger
assemblies.
12. place the loop at the top of each upper col-
lection bag over each hook on the hanger
assemblies (see figure 20).
figure 18. hanger attached to hanger support
(g061/g0672 shown).
hanger
hanger support
9. Mount the hanger assembly on the protruding
rod on the collector with one (Model g0671/
g0672) or two (Model g0673) 1⁄4"-20 x 1⁄2"
hex bolts, as shown in figure 19.
figure 19. hanger assembly mounted onto
collector (g0671/g0672).
hanger
Assembly
figure 20. upper filter bag mounted on hanger
assembly.
Bag loop
hanger
Assembly
13. thread the bag clamp into and around the
bottom seam of the upper collection bag (see
figure 21).
hook
figure 21. upper filter bag secured to collector.
Bag Clamp
hex Bolts
1⁄4"-20 x 1⁄2"
hex Bolt
1⁄4"-20 x 1⁄2"