Crosscutting

 

Miter Cuts

 

 

 

 

 

 

"Crosscutting" means cutting across the grain of a natural wood workpiece. In other man-made materials, such as MDF or plywood, crosscutting means cutting across the width of the workpiece.

To make a crosscut using the miter gauge:

1.DISCONNECT THE SAW FROM POWER!

2.Ensure that the blade guard/spreader is installed.

3.Move the rip fence aside and position the miter gauge, adjusted to 90°, in a miter slot.

4.Adjust the blade height so the teeth protrude approximately 1⁄4" above the workpiece.

5.Slide the miter gauge near the blade and adjust the workpiece so the blade will cut on the waste side of the line.

6.Plug in the table saw, turn it ON, and allow it to reach full speed.

7.Hold the workpiece firmly against the face of the miter gauge (Figure 56), and ease it through the blade until the workpiece is com- pletely past the saw blade.

A miter is an angled crosscut. Miters are usually cut in the same manner as crosscuts, using the miter gauge and a predetermined mark on the workpiece.

To perform a miter cut:

1.DISCONNECT THE SAW FROM POWER!

2.Ensure that the blade guard/spreader is installed.

3.Determine the angle of your cut. If the angle needs to be very precise, use a protractor to set the miter gauge to the blade.

4.Place the face of the miter gauge against the edge of the workpiece and place the bar across the face of the workpiece. Use the bar as a guide to mark your cut, as shown in

Figure 57.

Figure 56. Typical crosscutting operation.

Turn OFF the saw and allow the blade to come to a complete stop before removing the cut-off piece. Failure to follow this warn- ing could result in serious personal injury

Model G0690/G0691 (Mfg. 11/10+)

Figure 57. Example of marking miter line.

5.Place the miter gauge back into the slot and hold the workpiece firmly against the miter gauge body. Slide the miter gauge near the blade and adjust the workpiece so the blade will cut on the waste side of the line.

6.Proceed to make the cut in the same manner as described in the Crosscutting instruc- tions.

-41-

Page 42 Page 44
Page 43
Image 43
Grizzly G0690, G0691 owner manual Crosscutting Miter Cuts, To make a crosscut using the miter gauge, To perform a miter cut
Page 42 Page 44

G0690, G0691 specifications

The Grizzly G0691 is a remarkable cabinet table saw designed for both hobbyists and professional woodworkers seeking precision and reliability. With its robust construction and advanced features, it stands out in the woodworking industry, making it a popular choice among serious craftspeople.

One of the key features of the G0691 is its powerful 3 HP motor, capable of delivering the performance needed for even the most demanding tasks. This motor can handle various materials, from softwoods to hardwoods, ensuring smooth, clean cuts every time. The saw's electronic variable speed control also allows users to adjust the blade speed according to the type of material being cut, providing flexibility and versatility in woodworking projects.

The G0691 boasts a heavy-duty cast iron table, which offers exceptional stability and supports larger workpieces. The table measures 27 inches by 40 inches, providing ample workspace for cutting. The potential for expansion is also present, as the saw is designed to accommodate extension wings for added surface area, making it easier to manage larger materials.

An impressive feature of the G0691 is its premium fence system. The T-square design ensures accurate measurements and smooth adjustments, enabling woodworkers to achieve precise cuts. This system includes a quick-release lever for easy adjustments, allowing for efficiency during the workflow.

Safety is another priority with the Grizzly G0691. The saw is equipped with a smart blade-guard system designed to offer maximum visibility while protecting the user from accidental contact with the blade. Additionally, the riving knife technology significantly reduces the likelihood of kickback, enhancing safety during operations.

The G0691's dust collection system is integrated to minimize debris, creating a cleaner workspace. The system is designed to connect easily to standard dust collection hoses, allowing for effective removal of sawdust and other waste materials.

In summary, the Grizzly G0691 combines power, precision, and safety into an exceptional cabinet table saw. Its durable construction, advanced fence system, effective dust collection, and user-friendly features make it an ideal option for both seasoned professionals and dedicated hobbyists. The investment in this tool is justified by its performance, ensuring it stands out as a valuable addition to any woodworking setup.
Top Page Image Contents