3.Attach the bandsaw to the stand with 8 hex bolts, 16 flat washers and 8 hex nuts and tighten with a 12mm wrench (see Figure 12).

Figure 12. Front view of bolt locations.

-18-

Pulley Cover

 

Components and Hardware Needed:

Qty

Pulley Cover

1

Pan Head Screw 14"-20 x 58"

2

To install the pulley cover:

 

1.Slide the pulley cover over the drive-shaft.

2.Align the holes and secure with the two 14"- 20 x 58" screws (see Figure 13).

Figure 13. Installing pulley cover.

G1010 4" x 6" Metal-Cutting Bandsaw

Page 20
Image 20
Grizzly G1010 instruction manual Pulley Cover, To install the pulley cover