Adjustment Section | Grizzly G1021 manual

Clean and lubricate the chain sprockets as need- ed. The gearbox oil should be checked before the first use. It is full when oil begins dribbling out of the fill hole. Oil should be replaced yearly. Use 80-90 Wt. gear oil in normal situations. Use 50 wt. motor oil for unheated, winter shops. See

Adjustment Section.

The lead screws and columns should be wiped of any grease and dust build up once a week. They should be relubricated with light machine oil. See

Figure 42.

The infeed/outfeed pressure setscrews double as lubrication ports for the rollers. Add 1-2 drops of light machine oil to all ports before each use. See Figures 43 and 44.

Lead Screw

Column

Lubrication Ports

Figure 43. Lubrication ports on top of machine.

Oil Can,

1-2 drops

Figure 42. Lead Screw inside of column.

Figure 44. Oiling lubrication ports.




G1021 15" Planer	-35-

Image 35

Grizzly G1021 instruction manual Adjustment Section

Contents

Planer Page Table Of Contents Adjustment Block Pattern Warranty and Returns Safety Instructions For Power Tools Safety Safety Instructions For Power Tools Additional Safety Instructions For Planers Extension Cords FusingCircuit Requirements 220V Operation Grounding Commentary Introduction Parts Inventory Unpacking Site Considerations Clean Up Optional Stand AssemblyOverview To Mount the Planer Starter SwitchPlaner Unit To Mount the Handwheel Handwheel Knife Setting JigTo Assemble the Knife Setting JIG To Attach the Dust Port Extension Rollers Dust PortTo Attach the Extension Rollers Overview of planer adjustment controls G1021 15 Planer Adjustments To Check Table Parallelism Table AdjustmentGauge Block To Inspect the Knives Knife Inspection To SET the Knives Knife Setting Chip Breaker To Adjust the Chipbreaker To Check Roller Height Feed Roller Height Feed Roller Pressure To Adjust Roller HeightTo Adjust Roller Pressure Bed Rollers To Adjust the BED Rollers Chip Deflector To Adjust the Chip Deflector Anti-KickbackBelts To INSPECT/ADJUST the Pulleys To Inspect the Gearbox GearboxTo Check Belt Tension Extension Rollers Extension Rollers Thickness Scale To Adjust the Scale Table Locks Operations Depth Limiter Power FeedHandwheel Type Shear PSI Test Run Wood Species Planing Difficulties GeneralKnives Maintenance Fill Drain Lubrication Adjustment Section Closure Symptom Possible Cause Corrective Action Troubleshooting Reference 145 79 80 146 See page 41-42 for Reference Number Listing See page 41-42 for Reference Number Listing Pulley Cover PK06M G1021 15 Planer Warranty and Returns