Grizzly G1021 instruction manual Unpacking, Parts Inventory

Unpacking

The bandsaw is shipped from the factory in a carefully packed carton. If you find the machine to be damaged after you’ve signed for delivery and the truck and driver are already gone, you will need to file a freight claim with the carrier. Save the containers and all packing materials for inspection by the carrier or their agent. Without the packing materials, filing a freight claim can be difficult. If you need advice regarding this situa- tion, please call us immediately.

WARNING

The G1021 is a heavy machine with a 475 lb. shipping weight. DO NOT over-exert your- self while unpacking or moving your machine – get assistance. In the event that your planer must be moved up or down a flight of stairs, be sure that the stairs are capable of supporting the combined weight of people and the machine. Failure to use care while assembling or moving could result in serious personal injury.

Parts Inventory

Take a quick inventory of the parts and put them aside for assembly later. After all the parts have been removed from the container, you should have:

•Planer Unit

•Dust Port

•Roller Extensions

•Hand Wheel

•Stand Top (Optional)

•Stand Legs (Optional)

•Stand Braces (Optional)

Now is a good time to inventory the fasteners required for assembly:

Hardware	Qty
Cap Screw 6mm - 1.0 x 12	3
Lock Washer 6mm	3
Hex Bolts 6mm - 1.0 x 12	3
Hex Nuts 6mm - 1.0	3
Washers 6mm	6
Knife Setting Jig Rod	1
Knife Setting Jig Brackets	2
E-clips	2
Allen® Wrench 3mm	1
Allen® Wrench 4mm	1
Allen® Wrench 5mm	1
Allen® Wrench 6mm	1
Open End Wrench 8-10mm	1
Open End Wrench 12-14mm	1
Handle	1
Hex Nut 10mm - 1.25	1
Flat Washer 10mm	1
Scale	1
Hex Bolts 8mm -1.25 x 20	6
Flat Washers 8mm	6
Setscrews 8mm - 1.25 x 12	6

Stand Hardware (Optional)	Qty
Carriage Bolts 5⁄16" - 18 x 5⁄8"	24
Hex Nuts 5⁄16" - 18	28
Flat Washers 5⁄16"	24
Hex Bolts 5⁄16" - 18 x 2"	4
Fender Washers	8

In the event that any parts are missing, we will be happy to replace them. Contact our Customer Service number for assistance. If any non-propri- etary parts such as nuts, bolts or washers are missing, we will be happy to replace these too, but for the sake of expediency, these items can be obtained at your local hardware store.

CAUTION

Some die-cut metal parts may have sharp edges (called “flashing”) on them after they are formed. Please examine the edges of all die-cut metal parts before handling them. Failure to do so could result in injury.

-10- G1021 15" Planer