Nikon 4 user manual System Requirements, Installation, What You Need to Run Nikon Capture

What You Need to Run Nikon Capture 4

System Requirements

What You Need to Run Nikon Capture 4

Before installing Nikon Capture 4, make sure that your system satisfies the following require- ments:

		Windows	Macintosh
		Pre-installed versions of Windows XP	Mac OS 9.0.4–9.2.2*, Mac OS X (ver-
		Home Edition, Windows XP Professional,	sion 10.1.5 or later). Note that Dutch,
OS		Windows 2000 Professional, Windows	Italian, Korean, and Swedish versions of
		Millennium Edition (Me), Windows 98	Nikon Capture 4 are not available for
		Second Edition (SE)	Mac OS 9.
CPU/Model		300 MHz Pentium equivalent or better	Built-in USB or FireWire port required
		• Windows, Mac OS X: 256 MB (768 MB	or more recommended)
RAM		• Mac OS 9: memory allocation of 64 MB or more to Nikon Capture 4 Camera
		Control, 512 MB or more to Nikon Capture 4 Editor
Hard-disk space		200 MB required for installation
Video		800 ⋅ 600 pixels or more with 16-bit color (High Color/thousands of colors). 24-bit
resolution		color (True Color/millions of colors) recommended.
		Open Host- Controller Interface (OHCI)	Built-in IEEE 1394 (FireWire) interface
	IEEE	compliant IEEE 1394 interface board or
	1394	card‡ required for connection to D1-	required for connection to D1-series
		series cameras	cameras
Interface†
			• Built-in USB interface
	USB	Built-in USB interface	• RATOC REX-PCIU3U USB interface
			board (USB 2.0; for use only with D2-
			series cameras under Mac OS X)
Supported cameras		D2-series, D1-series, D200, D100, D70s, D70, and D50
(Camera Control)

•CD-ROM drive required for installation

Other

•Internet connection required for some options

*With CarbonLib version 1.6 or later.

† Connect the camera directly to the computer. The camera may not function as expected when con- nected via a hub, extension cable, or keyboard.

‡See the websites listed on page 2 for the latest information on boards that have been tested and ap- proved for use.

Installation

For information on installing Nikon Capture 4, see the Nikon Capture 4 Install Guide.

Windows XP Home Edition/Professional, Windows 2000 Professional, Mac OS X

When installing, using, or uninstalling Nikon Capture 4 under the above operating systems, log on to an account with administrator privileges.

Camera Control for D100 Cameras (Macintosh)

Before using Nikon Capture 4 Camera Control with a D100 digital camera, Macintosh users will need to upgrade the camera firmware to version 2.00 or later. Contact a Nikon-authorized service representative for information on firmware upgrades.

Third-Party Plug-Ins

Nikon Capture 4 supports third-party nik Color Efex Pro 2.0 plug-ins that add a filter palette to Tool Palette 2. More information is available on-line ( 2).

5