Nikon user manual 148, Appendix D

Appendix D

4 Is the IEEE 1394 interface board correctly registered with the system (Windows only)?

Check whether:

•The “IEEE 1394 Bus Controller” is not displayed in the Device Manager

•The IEEE 1394 board is listed under “Other Devices” or “Unknown Devices”

•A yellow or red mark appears next to the listing for the IEEE 1394 board

If any of the above apply, the IEEE 1394 board has not been correctly registered with the system. See the documentation provided with the board for information on device registration.

Captured Images are Too Bright, Too Dark, Washed Out, or Out of Focus

•At default settings, Nikon Capture 4 does not modify images when they are captured from the camera. In the General tab of the Preferences dialog, verify that your images are being captured at Nikon Capture’s default settings and not at the settings of the last image cap- tured. See “Preferences” for more information ( 98). Alternatively, check the settings in the Curves, Color Balance, and Unsharp Mask windows. Choose the reset option from the Settings menu for each window, or turn the Apply button for the window off.

•Are monitor settings correctly adjusted?

Try adjusting your monitor’s contrast/brightness, color system, etc. to be sure that it is properly set for viewing images. See the documentation provided with your monitor for instructions on adjusting monitor settings.

148