Nikon user manual 124, Simulated LCD Panel, Shoot Buttons

The Camera Control Window

Simulated LCD Panel

This panel shows the information displayed in the camera’s viewfinder, with the exception of camera errors. Clicking on an indicator in the panel opens the Nikon Capture 4 Camera Control window to the tab that controls the selected option, where adjustments can be made.

When a D2-series, D200, D70s, D70, or D50 camera is connected, the amount of memory remaining in the camera memory buffer is displayed at the right edge of the simulated LCD panel. This information is updated at regular intervals, but temporary discrepancies may exist between the display and the actual amount of memory remaining in the buffer.

Shoot Buttons

Click either of these buttons to take a photograph at current settings. If a D2-series, D200, D70s, D70, or D50 camera is connected, photos can be taken in continuous shooting mode ( 128); in this case, the AF and Shoot and Shoot buttons will instead be labeled AF and Start and Start.

•AF and Shoot/AF and Start: When this button is clicked, the camera will perform an auto- focus and then release the shutter to take a photograph.

•Shoot/Start: Click this button to take a photograph. If the selected focus mode is single- servo AF, an autofocus operation will be performed before the shutter is released.

Camera Settings That Can Not Be Adjusted from Nikon Capture

The following operations can not be performed from Nikon Capture 4 Camera Control:

Status not displayed

Status displayed

Operation	Camera
Burst photography (continuous shooting mode)	D1-series/D100
Continuous servo autofocus	All supported models
Pressing the shutter-release button halfway to check focus	All supported models
Autofocus-only operation (use AF and Shoot to perform autofocus)	All supported models
Manual aperture adjustment using the lens aperture ring	D2-series/D1-series/D200
Reactivating the camera after it has entered sleep mode	D1-series
Depth-of-field preview	All supported models
Auto bracketing	D1-series/D100
Compression options for NEF (RAW) images	D100
Operation assigned to FUNC. button with Custom Setting f4	D2-series/D200
Remote (D70s, D70, and D50 only) and self-timer mode selection	D2-series/D200/D70s/D70/
	D50
Focus mode selection using camera focus-mode selector	All supported models
Metering	D1-series/D100
Exposure mode (can be adjusted if Enable controls on camera	D100/D70s/D70/ D50
body is selected when D70s, D70, or D50 is connected)
Shooting mode	D100
Shutter-speed lock	D2-series/D1-series
Aperture lock	D2-series/D1-series
Autoexposure lock	All supported models
Speedlight flash-level compensation	D2-series/D1-series
M-UP(mirror up) mode selection	D2-series/D200
Selection of second center focus area group in group dynamic-AF mode	D2-series/D200

124