Nikon user manual Camera Control Window, 108, Getting to Know Nikon Capture 4 Camera Control

The Camera Control Window

The Camera Control Window

Getting to Know Nikon Capture 4 Camera Control

The main parts of the Camera Control window are identified below. For more information, see the “Nikon Capture 4 Camera Control Window” ( 123).

Connection status ( 123)
Shows the status and name of any
cameras connected.	Menu bar

Download Options button

Click this button to choose a destination for photographs captured from the cam- era.

Camera control page selection tabs

The menus, sliders, and buttons on each tab are used to control camera settings.

Simulated LCD panel

Performs the same function as the infor- mation display in the camera viewfinder.

Hide Camera Controls button

Shoot buttons

Click these buttons to take pictures.

Click this button to hide “Enable controls on the camera body” and the camera control panels in the Nikon Capture Camera Control window.

Camera Control

Changes made to settings in the Nikon Capture 4 Camera Control window only apply to photographs taken after the changes are made, not to photographs that have already been taken.

The controls in the Nikon Capture 4 Camera Control window vary with the type of camera connected. More information on camera settings may be found in the documentation provided with your camera.

Camera Control for D100 Cameras (Macintosh)

Before using Nikon Capture 4 Camera Control with a D100 digital camera under Mac OS 9 or Mac OS X, confirm that the camera firmware is version 2.00 or later. Users of earlier versions will need to upgrade the camera firmware before using Nikon Capture 4 Camera Control. Contact a Nikon-authorized service representative for information on firmware upgrades.

Illustrations

Save where otherwise noted, the illustrations in this section show the dialogs displayed when the D70 is connected.

108