XVI. MACHINE DATA
GRIZZLY MODEL G1024 3/4 H.P. SHAPER
Design Type | Floor Model |
Overall Dimensions: |
|
Table | 15” x 18” |
Height From Floor to Top of Fence | 38" |
Height to Table From Floor | 341/2" |
Length | 24" |
Width | 27" |
Weight (Shipping) | 155 lbs. |
Weight (In Place) | 145 lbs. |
Construction: |
|
Table | Ground Cast Iron |
Fence Assembly | Cast Iron |
Body Assembly | Cast Iron |
Stand | |
Specifications: |
|
Spindle Travel | 37/8" |
Spindle Diameter | 1/2" |
Spindle Length | 3" |
Spindle Capacity under Nuts | 23/8" |
Spindle Speed | 10,000 RPM |
Table Counterbore | 3" Diameter, 3/8" Deep |
Spindle Bearings | Ball/Shielded and |
Motor: |
|
Type | TEFC Capacitor Start Induction |
Horsepower | 3/4 H.P. |
Phase / Cycle | Single Phase / 60 HZ |
Voltage | 110V/220V |
Amps | 10/5 |
RPM | 3450 |
Bearings | Shielded and |
Features: |
|
Fence | Both Sides Adjustable |
Switch | ON/OFF |
Switch | Reversible |
Starting Pins | Standard |
Protective Cover For Freehand Work | Standard |
Spindle Lock | Standard |
Miter Gauge | Standard |
Specifications, while deemed accurate, are not guaranteed.
- 28 -
