Grizzly G1024 instruction manual V. Piece Inventory, Shaper Unit Miter Gauge Spindle and Spacers

V. PIECE INVENTORY

Take a quick inventory of the parts and put them aside for assembly later.

Since the majority of the shaper is pre-assembled at the factory, there aren’t a lot of items to inven- tory. You should have the following:

•Shaper Unit

•Miter Gauge

•Spindle and Spacers

•Fence Boards

•Freehand Guard

•Bolt Bag (See below)

•Stand (4 pcs.)

•Adjustable Fence (3 pcs.)

The Model G1026 Bolt Box contains:

Rubber Feet	(4)	Nut M8-1.25	(16)
Hex Bolt M6-1.0x12	(4)	Flat Washer 3/8"	(16)
Hex Nut M6-1.0	(4)	Slot Head Screws	(4)
Flat Washer 3/8"	(4)	Flat Washer 5/16"	(4)
Carriage Bolt M8-1.25x20	(16)	Nut M8-1.25	(4)

The quantities given here are the minimum necessary to do the job; there may be some extra parts. On the other hand, bolt bags are occasionally shipped from the factory with a nut or bolt missing. You might consider replacing those items at your local hardware store. It’s not that we’re trying to cheat you, but if you are short two screws that cost 10¢ apiece, it’s much cheaper to buy locally than writing or phoning us. Even more, the time saved in shipping will mean that your shaper is ready to use right away. Of course, if the number of items missing is extensive, or if the missing parts are more substantial than nuts or bolts, we want to know about it, so we can eliminate problems for future customers.

- 7 -