![](/images/new-backgrounds/1146739/14673945x1.webp)
Tool Post and Holder | Tailstock Controls | |
|
|
|
|
|
|
Tool post - A quick change tool post and 2 tool holders are supplied with the Model G4002/3. Figure 22 shows tool post and a holder with optional bit. Cutting tools can be secured and removed by tightening or loosening the clamping screws in the top of the holder. A threaded stud is mounted in the top of the holder and has a knurled thumb wheel. Rotating the thumb wheel allows for adjustment of the tool holder so the cutting tool can be centered. The handle on the tool post can be rotated to lock and unlock the tool holder onto the dovetail ways. The tool post may be rotated by loosening the nut at the top of the tool post.
More styles of tool holders are available through Grizzly Industrial, Inc. Consult the latest catalog for styles, prices and ordering information.
Figure 22. Quick change tool post.
The tailstock serves many functions. The prima- ry use is for holding centers and drill chucks. The barrel has a Morse taper #3 bore and is imprinted with graduations in millimeters and inches. Please refer to Figure 23.
Tailstock Handwheel - Turning the handwheel advances or retracts the barrel in the tailstock. The graduated dial on the handwheel is adjustable.
Top Lock Lever - This lever locks the tailstock barrel in place.
Side Lock Lever - This lever locks the tailstock in place on the lathe bed.
Figure 23. Detail of tailstock controls.
G4002/3 Gear Head Lathes |