7.Using a straightedge as a guide, align the splitter with he saw blade. See Figure 12. Use care to ensure that alignment is exact. Failure to do so will result in difficulties when ripping or crosscutting.
Figure 12. Aligning the splitter with the blade.
8.Once the splitter is aligned, tighten all fas- teners securely.
9.Check splitter alignment after tightening.
Dust Collection Port
The Model G5045 10" Bench Top Table Saw is equipped with a dust which can be attached to standard 21⁄2" dust collection systems. To connect your table saw to a dust collection system:
1.Insert the end of a standard 21⁄2" flexible dust collection hose or shop vac hose into the dust port at the base of the table saw. See Figure 13.
2.Turn on the saw and the vacuum or dust collection system and begin operation.
Figure 13. Attaching dust collection hose.
|
|
|
|
|
|
|
|
|
|
|
|
G5045 10'' Bench Top Table Saw | |||
