Miter Gauge

The miter gauge provides angle-adjustable sup- port for workpieces while cross-cutting with the Model G5045 Table Saw. To adjust the miter gauge:

1.Loosen the clamp knob so the gauge is free to rotate.

2.Slide the miter gauge into one of the two miter slots.

3.Using a square as a guide, adjust the miter gauge until its face is perpendicular to the miter slot. See Figure 16.

4.If the pointer does not indicate zero, loosen the screw and re-align the pointer. Tighten screw.

Figure 16. Aligning miter gauge blade slot.