Spindle Lowering |
| Table Tilt |
Speed |
| Adjustment |
|
|
|
|
|
|
The Model G8030 Overarm Router uses an air valve to control the speed with which the spindle is lowered.
1.Increase or decrease lowering speed, as desired, by turning the knurled knob as shown in Figure 13.
2.We suggest you try different settings until you find the most useful speed to use. Hardwoods will require a slower setting than softwoods.
Figure 15. Spindle adjustment.
The table on the Model G8030 adjusts from a 0° to 45° angle of tilt. The right side trunnion is marked in degrees, and both trunnions have lock- ing handles to secure the table in the exact posi- tion needed.
1.Loosen the table lock handles as shown in
Figure 16.
Table Tilt
Scale
Figure 16. Table tilt adjustment scale
and handle.
2.Tilt the table until it reaches the required angle.
3.Tighten the right and left locking handles securely.
|
|
|
|
|
|
|
|
G8030 3 H.P. Overarm Router |
|
| |
