To install the wood facing:
1.Secure the wooden fence pieces (as shown in Figure 16) with the 5⁄16''- 18 x 1'' Phillips® head screws, washers, and hex nuts provid- ed.
2.If using your own wood faces, make sure the countersunk holes in your fence material are deep enough to keep the entire screw head below the fence surface.
Figure 16. Attach wooden fence assembly.
Guard Cover
To mount the guard cover:
1.Place the guard cover over the threaded holes on top of the guard body as shown in Figure 17.
2.Thread the knobs into the guard body and secure the cover.
Figure 17. Guard cover.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G8621 | ||||||
